Selfhosters what is the power draw of your entire setup? And have you done anything special to manage it you’d like to share?

Including all network equipment I use around 110kWh of good ol’ 120V 60Hz USA juice per month. Averaging about 215 watts of power draw for my systems. Nothing amazing, but I like to think that it’s a conservative setup for everything I accomplish with it. I’m paying around $25 a month for my setup. None of that includes my work PC or personal PC, just hosting infrastructure.

Other than trying to make sure all power states are available on my server I haven’t done a lot of power conservation.

I’m curious what you all have.

  • achsonaja@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    3 minutes ago

    About 100w on average for a nuc, 4 bay nas (only 3 in use), 4 poe cameras, AP, 2 switches, IP kvm, and the ups. Pretty happy with how little that seems to be for the amount there.

  • michaelharley@infosec.pub
    link
    fedilink
    English
    arrow-up
    1
    ·
    3 minutes ago

    About 113 kWh (155w) for me. I have 2 Intel NUC type devices, with two drive enclosures. Plus my networking equipment which include POE cameras.

  • Joelk111@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    15 minutes ago

    About 300-400 watts. I should put it on a smart plug to track it over time. I have a NAS with 16 HDDs, an outdated super overkill switch that I should replace to save some power, and a few old laptops.

    It also might use some more power while transcoding for my PeerTube Instance or Jellyfin, and I have my desktop set up as a remote runner for the PeerTube Instance, so that uses some additional power.

  • Arda@piefed.social
    link
    fedilink
    English
    arrow-up
    3
    ·
    15 minutes ago

    homelab running linux mint with about 60 docker containers about 45w, meassured at the socket (2HDD)

  • bolapara@lemmy.ml
    link
    fedilink
    English
    arrow-up
    2
    ·
    18 minutes ago

    ~500W continuous, ~625W peak. To reduce this further I’d really need to start consolidating hardware. I do have one system that could be replaced with something more modern and would probably drop 20-30W. And my fileserver is a bit overkill as well so there could be improvements there.

  • Decronym@lemmy.decronym.xyzB
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    7 minutes ago

    Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:

    Fewer Letters More Letters
    AP WiFi Access Point
    ISP Internet Service Provider
    NAS Network-Attached Storage
    NUC Next Unit of Computing brand of Intel small computers
    PoE Power over Ethernet
    RPi Raspberry Pi brand of SBC
    SATA Serial AT Attachment interface for mass storage
    SBC Single-Board Computer
    SSD Solid State Drive mass storage
    Zigbee Wireless mesh network for low-power devices

    [Thread #128 for this comm, first seen 13th Oct 2026, 23:00] [FAQ] [Full list] [Contact] [Source code]

  • Creat@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    1
    ·
    34 minutes ago

    My various servers, firewall and nas are relatively power optimized. Everything including switches (most with some 10g ports) and access points is 160 W or so. I can’t give you monthly usage, as I’ve got solar+battery so it’s frequently just 0 kWh for some days. It’s also rather hard to separate from the other power usage in the house when solar doesn’t fit cover it.

  • neidu4@piefed.social
    link
    fedilink
    English
    arrow-up
    2
    ·
    58 minutes ago

    Around 700W on low load, almost idle. Haven’t had the chance to test it at full load yet.

    It sits in my basement, so the waste heat is actually useful this time of year. Even more so when my basement would actually be freezing.

    I plan on implementing scheduling where the two most power hungry servers are powered down and up as needed. The other two take almost nothing.

    Also, the UPS supports a green mode that is a lot more efficient but with a downside of output side dropping out a few ms. This removes any conversion loss. I haven’t tested whether my hardware can tolerate it yet, so for now I’m living with the conversion loss.

    My house is powered by cheap hydroelectric supply, generated in a mountain roughly 5km from my house, so I’m not worried.

  • LastYearsIrritant@sopuli.xyz
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 hour ago

    I can’t believe I’m the lowest power draw at 50w. I thought that was pretty high.

    That includes all my network hardware, my NAS, and my server. Basically everything that is “always on”

  • Sammirr@aussie.zone
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 hour ago

    About 230w at idle with 3 servers, 2 routers, switch with PoE for umpteen devices, 16 spinning hdds.

  • a1studmuffin@aussie.zone
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 hour ago

    Around 150W for UPS, Mikrotik router, Pi 4, Proxmox/TrueNAS server with 8x SAS drives. Without the SAS drives I’d be closer to 50W, but how else am I going to heat up my cupboard? I got the SAS drives at a bargain price thankfully… I estimate about AUD300/year in electricity.

  • CameronDev@programming.dev
    link
    fedilink
    English
    arrow-up
    7
    ·
    2 hours ago

    NAS sits at 24w idle. Security cams are drawing 19w of poe power, but I suspect there is a bit more being used in total. I have another NUC using probably around 24w max.

    I’ll slap some power meters on the switches and main nuc and try get some more accurate numbers.

  • tychosmoose@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    2 hours ago

    90w here, so 65kwh/mo. Tinyminimicro server. Three pi (5, 4, 3B), fiber gateway, Mikrotik router, switch and two APs. Plus power gear (managed PDU and UPS).