This is true, but…

Moore’s Law can be thought of as an observation about the exponential growth of technology power per $ over time. So yeah, not Moore’s Law, but something like it that ordinary people can see evolving right in front of their eyes.

So a $40 Raspberry Pi today runs benchmarks 4.76 times faster than a multimillion dollar Cray supercomputer from 1978. Is that Moore’s Law? No, but the bang/$ curve probably looks similar to it over those 30 years.

You can see a similar curve when you look at data transmission speed and volume per $ over the same time span.

And then for storage. Going from 5 1/4" floppy disks, or effing cassette drives, back on the earliest home computers. Or the round tapes we used to cart around when I started working in the 80’s which had a capacity of around 64KB. To micro SD cards with multi-terabyte capacity today.

Same curve.

Does anybody care whether the storage is a tape, or a platter, or 8 platters, or circuitry? Not for this purpose.

The implication of, “That’s not Moore’s Law”, is that the observation isn’t valid. Which is BS. Everyone understands that that the true wonderment is how your Bang/$ goes up exponentially over time.

Even if you’re technical you have to understand that this factor drives the applications.

Why aren’t we all still walking around with Sony Walkmans? Because small, cheap hard drives enabled the iPod. Why aren’t we all still walking around with iPods? Because cheap data volume and speed enabled streaming services.

While none of this involves counting transistors per inch on a chip, it’s actually more important/interesting than Moore’s Law. Because it speaks to how to the power of the technology available for everyday uses is exploding over time.

I used KDE Connect on Ubuntu with Gnome. No issues.

Old school Unix guy here…vi,awk and sed are all that you need.

I’m not sure if traffic is “convenience” at this point. At least where I live, it’s a nearly essential piece of functionality.

In fact, for local driving it’s often the only reason to use a map app. I already know how to get to most of the places I want to go, I just need to know the best route to avoid traffic now.

Technically, he would have three drives and only two drives of data. So he could move 1/3 of the data off each of the two drives onto the third and then start off with RAID 5 across the remaining 1/3 of each drive.

Deal with the ethernet port issue by purchasing a 5 port ethernet switch. Maybe the rest of your issues go away?

Yes, $15 CAD/day to “roam like home”. I have an Orange eSIM that I can keep alive if I use it at least once every 6 months - with a local french number that stays mine. It costs me about $40 CAD for a 30 day - 20GB top up. My wife uses Nomad for data only, we both don’t need local numbers, and it generally costs $12 CAD for 5 GB 2 week top-up.

So I figure about $60-70 CAD for 3 weeks travel virtually anywhere in Europe. Calls and SMS included (for one) without long distance charges. Compared to $630 for “roam like home” for two people from a Canadian carrier - doesn’t matter which one as far as I can tell.

We both recently got new phones to be able to use eSIMs.

And the physical SIMs stay active. So my elderly parents can call my Canadian number if there’s an emergency and it will ring through.

In fact, on our last trip to Rome, when we used a credit card at the hotel, it was refused and then seconds later I got a text from the bank asking for confirmation on my Canadian number. I had no choice but to text “Yes” back, and that single text activated roaming for the day and cost me $15.

In this case you could view a swap partition as a safety net. Put 20-30GB in a swap partition in case something goes wrong. You won’t miss the disk space.

Well, there are specific hardware configurations that are designed to be servers. They probably don’t have graphics cards but do have multiple CPUs, and are often configured to run many active processes at the same time.

But for the most part, “server” is more related to the OS configuration. No GUI, strip out all the software you don’t need, like browsers, and leave just the software you need to do the job that the server is going to do.

As to updates, this also becomes much simpler since you don’t have a lot of the crap that has vulnerabilities. I helped manage comuter department with about 30 servers, many of which were running Windows (gag!). One of the jobs was to go through the huge list of Microsoft patches every few months. The vast majority of which, “require a user to browse to a certain website” in order to activate. Since we simply didn’t have anyone using browsers on them, we could ignore those patches until we did a big “catch up” patch once a year or so.

Our Unix servers, HP-UX or AIX, simply didn’t have the same kind of patches coming out. Some of them ran for years without a reboot.

Kanban is probably way overkill as a model for what you want. The key about Kanban is control of WIP/Queues at various stages and pulling items through the workflow. With a simple ToDo/WIP/Done workflow, you’re probably going to find any Kanban apps are too complicated for what you get out of them.

I dunno. The title was “Are there really no viable alternatives to PhotoShop on Linux?”. I think it’s fair to say, “There’s GIMP”. It’s viable. People use it successfully and happily. 'Nuff said.

The last rPi I bought was all of $40. I thought it was a bargain for the specs.

I don’t get it either. I’ve been using it on some older laptops because I wanted something lighter weight. It works well for me.